The Multifit FR444B mounting kit allows the fitting of Rizoma Light Unit turn signals in an easy, fast and adaptable way.
The kit consists of two aluminium brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminium clamping nuts and included in the kit. For better fastening, a cleaning set is provided to prepare the surface on which the brackets will be placed. To get the kit correctly attached, Rizoma recommends carefully following the provided mounting instructions for the suggested timing and steps.
For front turn signals on faired bikes, Rizoma recommends mounting it in the inner side of the wheel compartment to make sure that the turn signals do not interfere with the wheel movement.
Attention, the potential position change of the turn signals regarding the OEM, must always respect that:
• The light beam must be longitudinal in the direction of travel
• The distance between the two turn signals must be 240 mm in the front position and 180 mm in the rear
The kit includes two brackets and two clamping nuts in anodized aluminium, double-sided 3M tape (VHB 4941), a cleaning and surface preparation set (isopropyl alcohol-soaked wipe and primer stick) also two adhesive cable clips.
Warning: the FR444B mounting kit is compatible only with Rizoma Light Unit indicators.
Part Number: FR444B
The kit consists of two aluminium brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminium clamping nuts and included in the kit. For better fastening, a cleaning set is provided to prepare the surface on which the brackets will be placed. To get the kit correctly attached, Rizoma recommends carefully following the provided mounting instructions for the suggested timing and steps.
For front turn signals on faired bikes, Rizoma recommends mounting it in the inner side of the wheel compartment to make sure that the turn signals do not interfere with the wheel movement.
Attention, the potential position change of the turn signals regarding the OEM, must always respect that:
• The light beam must be longitudinal in the direction of travel
• The distance between the two turn signals must be 240 mm in the front position and 180 mm in the rear
The kit includes two brackets and two clamping nuts in anodized aluminium, double-sided 3M tape (VHB 4941), a cleaning and surface preparation set (isopropyl alcohol-soaked wipe and primer stick) also two adhesive cable clips.
Warning: the FR444B mounting kit is compatible only with Rizoma Light Unit indicators.
Part Number: FR444B